Sonoma opencore boot loop after selecting startup disk in System Settings
https://redd.it/1nofrqm
@r_hackintosh

Desktop pc problems

is dortania guide the only guide? because i have newer hardware and i really wanted to make a separate partition where I'd put macOs. Is there a non-official project on github to port This whole hackintosh thing to newer gpus and cpus (RX 9070 XT and 9700X)

https://redd.it/1noeijj
@r_hackintosh

Anyone tried TL-WN823N USB wireless adapter on final macOS Tahoe?

I recently upgraded from Sequoia to final Tahoe. I'm using Hackintosh laptop but the internal wireless card kext isn't supported yet in Tahoe. Wired LAN also only working in recovery mode. Now I can only use the USB cable tethering from Android to access the internet and download something. And when I try to manually load the kexts installed by the official TP-Link's driver and chris1111's Wireless USB OC Big Sur Adapter using Terminal command kextutil, which was previously working on Sequoia, it returns error "dependency resolution failure". However, in System Information, the device is detected as "802.11n NIC", but not listed anymore in the network services in System Settings. Mine is TL-WN823N v3.

Can anyone help fix that, or tried that USB dongle wireless adapter in final Tahoe, whether you're using Hackintosh, real Intel Macs, or Apple Silicon Macs, and succeeded or experienced the same or different problem with me? Thanks.

https://redd.it/1noec4r
@r_hackintosh

Please help me. I can't boot with Ventura. It's selected in the BIOS, but Windows starts up from the other SSD.

I'm asking for your help. I have a Lenovo L314 laptop with an i7 9750h CPU. I installed Ventura on an SSD. I installed Windows 11 on the second SSD, and Ventura is selected as the boot option in the BIOS. Until yesterday, when I turned on the notebook, the Ventura Windows and NVRAM icons appeared. Today, when I turn on the PC, Windows starts up, but the Mac disk is selected in the BIOS. However, if I remove the SSD with Windows 11, Ventura starts up. What can I do? I'm asking everyone for help if you can help me understand what I'm doing wrong. I haven't had any problems in five months. Thank you, I'm waiting for someone who can spare a few minutes with me. I'm going crazy.


in italian

aiutatemi non riesco a fare il boot con ventura nel bios è selezionato ma si avvia windows dell'altro ssd


vi chiedo per favore un aiuto io ho un laptop lenovo l314 con cpu i7 12700h in un ssd .Sul secondo ssd ho installato windows 11 e come boot dal bios è selezionato ventura .fino ad ieri accendo il notebook venivano furi le icone ventura windows e nvram aoggi accendento il pc si avvia windows ma dal bios e selezionato il disco mac. ma se tolgo l'ssd con windows 11 ventura si avvia.cosa posso fare chiedo aiuto a tuuti se potete aiutarmi a capire cosa sbaglio.In cinque mesi non ho avuto bessun problema.grazie aspetto qualcuno che puo' perdere qualche minuto con me.Sto uscendo pazzo.





https://redd.it/1nojmz6
@r_hackintosh

Tahoe not updating on iMac (Retina 5K, 27-inch, 2020) Hackintosh

Hey all,

Curious if anyone has run into this issue. I am running a Mackintosh as an iMac (Retina 5K, 27-inch, 2020) when I go to check for software updates, it isn't showing me Tahoe.

Apple says it is compatible. https://support.apple.com/en-us/122867

Anyone else in a similar situation, and any suggestions to get it working?



https://support.apple.com/en-us/122867

https://redd.it/1nokpta
@r_hackintosh

Hackintosh on AMD Athlon Silver 3050u?

So I have a lenovo ideapad 3 15ada05 laptop with 20gb of ram with AMD Radeon Vega 3 graphics card inside with a 1tb ssd in it.

https://redd.it/1nondip
@r_hackintosh

Proper Uninstallation Suggestions!

Hi everyone:

Years ago, about when I got my new PC built, I made sure it was compatible with Hackintoshing at the time. I got it successfully configured with High Sierra Dual Boot. After that, I sparingly used it to tinker around, but it's been years that I don't really use that partition.

I need to wipe that part of the system and subsequently wipe the Windows partition to start over for the inevitable Windows 11.

The question is the following: Are there any precautions or things I need to do to make sure I adequately remove all associated items from the MacOS partition?

The MacOs partition is in a separate drive, so wiping that would be easy, but I'm not sure if there are any other deep changes that could present issues. I ask because I know the config.plist changed things in the BIOS that makes my computer think it's an iMac. Even today, I can see the names through the Windows install.

Thanks in advance!

https://redd.it/1noondh
@r_hackintosh

Joining the Tahoe ranks with Fujitsu U729

I did not quite dare to do the install on my dual-boot (W11/Sequioa) so did it on a dedicated nvme. I basically took my Sequioa EFI, updated the 3 key OC files, set SMBIOS to 16.4 and away she went. I got some complaints about my (non) alps touchpad in the first install-phase, but after that it went smooth as butter. Everything seems to work: Graphics, USB, Wifi, Bluetooth. So far so good :)

Now switching back to Sequioa again in order to also reach W11 if needed (for the time being).

https://preview.redd.it/rt7tc9ymjyqf1.jpg?width=1215&format=pjpg&auto=webp&s=d948998dcf10f1a6cb95a653a156a2c1e05b1ec6



https://redd.it/1nopatx
@r_hackintosh

Can't Boot Tahoe Installer Phase 2 on existing machine running Sequoia

I wonder what's wrong in my config? I wonder what's needed to install.

I did SecureBootModel Disabled. Not sure what else is needed. Updated the USBMap. which actually made USBs on Ventura stop working, even though it contained both lines.

It stopped particularly on this area

https://preview.redd.it/fpm599dxezqf1.jpg?width=1684&format=pjpg&auto=webp&s=e19c0ec1ee6aeac544a1e603ed363b1682dbb51f

and here is my stripped config.plist with no serial numbers https://pastebin.com/P0e0YyeK

https://redd.it/1notu9t
@r_hackintosh

prohibited sign when mac os installer start

Hey everyone, I'm trying to install Hackintosh on my ASUS TUF A15 FA506IH and I'm stuck right at the end of the first boot phase.

My setup:

CPU: AMD Ryzen 5 4600H

GPU: NVIDIA GTX 1650 (disabled with boot args)

Wi-Fi: Intel AX210

LAN: Realtek RTL8111

I've successfully created my bootable USB and can launch the EFI from it. I can even get into the macOS Recovery environment and start the installer.

The problem is that after the system reboots to continue the installation, the screen just shows a prohibited sign. The system doesn't continue with the installation.

And i dont use nootered cuz after boot screen is turn off

And the question is, can someone tell me why this can happen?

https://redd.it/1nowb02
@r_hackintosh

After many time of my last 2 days, I finally finished my last Hackintosh build before Intel looses support: Tahoe on my Dell Latitude 5490 😍
https://redd.it/1np0kum
@r_hackintosh

I can't boot to the installer #EB.BST.FBS|! Err(0xE) <- EB.RH.LRH

No matter what I try I can't seem to boot into the installer for Big Sur

CPU: Intel Core i7-2600

GPU: Sapphire Pulse RX 580

Mobo: IPISB-VR (UEFI)

118:499 00:091 AAPL: #[EB|SB:SBGMFNS\] x86legacyap.im4m

118:590 00:091 AAPL: #[EB|RH:PF\] usr\\standalone\\OS.dmg.root_hash

118:683 00:092 AAPL: #[EB|RH:MF\] <"usr\\\\standalone\\\\OS.dmg.root_hash.x86legacyap.im4m">

118:775 00:092 AAPL: #[EB.LD.LF|IN\] 0 1 <"usr\\\\standalone\\\\OS.dmg.root_hash"> <"0">

118:869 00:094 AAPL: #[EB.LD.OFS|OPEN!\] Err(0xE) <"usr\\\\standalone\\\\OS.dmg.root_hash">

118:961 00:092 AAPL: #[EB.RH.LRH|P!\] Err(0xE) <- EB.LD.LF

119:053 00:091 AAPL: #[EB.BST.FBS|!\] Err(0xE) <- EB.RH.LRH

119:113 00:059 OCSMC: SmcReadValue Key 4D535463 Size 1

119:172 00:059 OCSMC: SmcReadValue Key 4D534163 Size 2

119:264 00:091 AAPL: #[EB.B.WFDW|!WF\] Err(0xE) 0

119:356 00:092 AAPL: #[EB|LOG:DT\] 2025-09-23T18:28:54

119:449 00:092 AAPL: #[EB|LOG:EXITBS:START\] 2025-09-23T18:28:54

I've tried running my plist through ocverified and it comes up with nothing

https://redd.it/1nozu58
@r_hackintosh

Repeatedly getting this error
https://redd.it/1np0tf8
@r_hackintosh

Not able to boot from usb Tahoe 26

Currently i am on sequoia 15.7, and it's working great almost everything. Only I missing feature is touch id of Keyboard and iPhone mirroring (I know it's because of missing T2 chip so I already gave up on that). But when I try to install Tahoe 26 via usb, usb is not booting. (stuck at recovery loading screen). IDK why. Is there any need changes in EFI or I need any extra kext to load for boot?

My Current Specs - Ivy Bridge (Desktop)

Processor - I7 3770 (thanks to Acidanthera for Cryptexfixup.kext) for support from Ventura to Sequoia otherwise I stuck at Monterey for forever)

RAM - 32gb DDR3 1600mhz

GPU - Sapphire Nitro RX590 8gb (thanks to OCLP for driver support)

SSD nvme m.2 - 4tb Crucial (via PCIE adaptor) I did changes in bios for natively support by adding nvme driver into bios. (thanks to Paul Murana, you gave extra speed to my Hackintosh Setup) https://www.youtube.com/watch?v=1KzDFgkbThE

Wi-Fi and Bluetooth - Fenvi t919 (via PCIE adapter) (already mapped via usbtoolbox in windows and gernerated kext. So working everything like trackpad, mouse and keyboard via Bluetooth)

I managed to use all PCIE lanes just because of L angled extension riser cable 10CM -https://amzn.in/d/9XkjR0p

I cant do much in hardware compatibility because I already maxed it.









https://redd.it/1np4l0q
@r_hackintosh

Successfully upgrading to MacOS Tahoe on my Ryzentosh
https://redd.it/1np74ze
@r_hackintosh

Tahoe 26

I am running Mac OS sequoia but i want to switch to Mac OS tahoe I don’t know hou to get the recovery for Mac OS tahoe does any one knows something about this

https://redd.it/1np8iql
@r_hackintosh

HoRNDIS 9.2 not working in MacOS Tahoe 26.0

https://preview.redd.it/orfuyizsi3rf1.png?width=627&format=png&auto=webp&s=7647bed4e412bfacf061f9b01f847726ab97d733

What's solution of this? Is there any alternative for usb tathering?

https://redd.it/1np9ccr
@r_hackintosh

macOS Sierra hackintosh not working

https://redd.it/1npa09l
@r_hackintosh