Ryzentosh (Ryzen 3 3200G & Ryzen 5 5600G, both with iGPUs)

I don't need to enable 'AppleCpuCfgLock' quirk anymore. I can say, my Ryzen system's power management now working like intel based hacks (near as native).

Because I have SSDT-CPUPM.aml file both for my Ryzen systems.
And, both machine now booting without this 'AppleCpuCfgLock' quirk. And also 'Dunmy power management' disabled.😍

Result: Animations now more smooth, Proper cpu power utilization and less beach ball spinning.

https://redd.it/1nq59hx
@r_hackintosh

Sonoma i5-7400 – Intel HD630 showing as 7MB VRAM

https://redd.it/1nqagrl
@r_hackintosh

Struggling to make HD 4000 work on Monterey and newer versions

I need help on my hackintosh, I've been trying to install macOS on a secondary SSD on my main PC, however all the versions I've tested so far, none of them worked well or just simply broke after installing the patch to make the Intel HD 4000 to work properly.

It's always two type of issues that happen, which is the hardware acceleration not enabling and this makes the system sluggish or the patch completely breaking macOS.

What should I do now? There's no place that I had searched for that helped me properly.

My system is:
Intel Core i7-3770
16GB RAM DDR3-1600MHz
NVIDIA GeForce GTX 1650 (disabled on the config.plist as it doesn't have support)
Intel HD Graphics 4000
ASUS P8H61-M LX2 R2.0

https://redd.it/1nqd5ib
@r_hackintosh

Tahoe - does FileVault encrypt the physical or logical disk?

Hi all,

After installing Tahoe on a Fujitsu (https://www.reddit.com/r/hackintosh/comments/1nopatx/comment/ng0338u/) and temporarily having FileVault issues with encrypting the disk (making any reboot/login attempts moot) i found a solution how to disable FileVault which worked rather nicely (https://www.ichi.co.uk/blog/removing-file-vault-from-internet-recovery-console)

But while i did a test-install of Tahoe on an isolated disk, my main disk is currently split between W11 and Sequioa and here is the question: If i try to install Tahoe on the logical disk that currently house Sequioa, will FileVault then basically encrypt the entire 'physical' disk or will it just bother doing it with the 'logical' disk (e.g the partition now dedicated to the Sequioa install)?

Any advice?

https://redd.it/1nqczll
@r_hackintosh

macOS 26 Tahoe iso

Looking for downloading macos tahoe iso(installer) for hackintosh purpose. I would be kind enough if someone help.

https://redd.it/1nqie1u
@r_hackintosh

How to fix kernel panic
https://redd.it/1nqliud
@r_hackintosh

Update from Sequoia to Tahoe 26.0 with Ryzen and AMD GPU!
https://redd.it/1nqphsh
@r_hackintosh

Best Wifi/Bluetooth M.2 card

For those of you who may have experimented with various network cards, what’s the most compatible and trouble free installation and use case wifi/bluetooth combo that fits into an M.2 slot? I have one that works now, but curious if there’s a more modern and faster card that supports all the continuity features.

https://redd.it/1nqpnbu
@r_hackintosh

MacOS Monterey - In Memory Panic Stackshot Suceeded

https://redd.it/1nqt5ca
@r_hackintosh

Tahoe hakintosh with Intel i3 6gen hd 530

I got igpu acceleration but when I enter my password it accepts it then get stuck in login screen and gets frozen

https://redd.it/1nqthaq
@r_hackintosh

blackscreen after verbose?

CPU: Intel i5-12400F (Alder Lake, no iGPU)
GPU: AMD RX 6600 (Navi23)
Motherboard: Asus H610M-E
Storage: NVMe SSD

i've created efi using opencose simplify,
it loads some script and then it goes black
and also tell me a stable macos version for music production

https://redd.it/1nqv1b5
@r_hackintosh

OC boot just wont work

I have a Ventura USB boot stick that I used to install Macos with on an internal SSD. When I choose Macos from the picker, the screen goes black and then just returns to the boot menu. I have exactly the same EFI that was working perfectly before I wiped the disks (for another project). I have also tried to add -v to the boot args, but nothing at all is shown on the screen.

OC is the latest, 1.0.5, with my previous Kext, ACPI and Drirvers folders repopulated. Also with known-good config.plist. I can also add that the hardware (AMD 5500 and RX6600) is unchanged since the previous installation.

Any advise on how to troubleshoot this further?

https://redd.it/1nquuej
@r_hackintosh

I did something to my EFI and Lossless Audio in Apple Music stopped working

Hi, hope all are well

I do not know what I did to my EFI that caused this, but Lossless Audio in Apple Music stopped working

I thought it was SecureBootModel, but no, changes it back to j137 and it still doesn't work. It doesn't work across 3 OSes - Ventura, Sequoia, and Tahoe.

Anyone have any ideas?

https://redd.it/1nqw4pl
@r_hackintosh

How to improve Boot time and log in Time on macOS Sequoia? ( IVY BRIDGE)

Hello! I wa able to install macOS 15.7 Sequoia on my ivy bridge HP Pavilion DV6-7070ex From 2012 it runs perfectly minus the non working sleep, but the boot time on it ( Even with an Kingston SSD) is around 40 ish Seconds from the OpenCore Boot picker until I can enter my password. and from password to Desktop is around 15 Seconds so almost a min (55 Secs) on macOS Monterey 12.7.6 the boot time was around 12 secs and login was 4 How can I improve it on MacOS 15 Sequoia? is there an SSDT patch, or some type of settings I toggle? Thanks for the help!

System Info:

Intel Core i7-3610QM @ 2.3 ghz.

16GB DDR3 RAM @ 1600 mhz

intel HD 4000 ( main)

Nvidia Geforce GT 630M ( Disabled in BIOS)

Intel Centrino wireless N-2230 Wifi Card and BT Combo

DISK: KINGSTON SA400S37240G Media SSD

SATA: AHCI

Keyboard: PS/2

Touchpad: I2C and I2C HID kexts by Voodoo ( its a synaptics HID)

OS: macOS 15 Sequoia ( 15.7)

Second OS: macoS 26 Tahoe ( TEST Only)

GPU acceleration: by OCLP root patches.

Wifi: Airport itlmw Ventura Version with Card spoofed as BroadCom Card to get the modern Wireless Patch in OCLP

Bluetooth: IntelBluetoothFirmware.kext, intelBTpatcher.kext, Bluetoolfixup.kext

Power management: SSDT made for it, AppleintelCPUPowermanagment.Kext and Client kext

Sleep: not working at all ( It Sleeps for a second then wakes/Turns on)

macOS Sequoia Boot times:

Current Boot TIME: 40 Secs from OpenCore Boot picker ---> Lock Screen.

Boot time from cold start: power press to Lock Screen = 1 min

Log in time: 14\~ 15 Secs from lock screen to working Finder Window.

*******************************************

macOS Monterey Boot times:

Boot time From Opencore to OS: 12 seconds.

Boot time From Cold Boot: 17 Ish Seconds.

log in time: 4\~5 Seconds.

Thanks for any help provided to make this speedy atleast!

https://redd.it/1nqyxpn
@r_hackintosh

Tahoe iMacPro1,1 (Patched) Black Screen

Hi guys, I’ve installed Tahoe on a separate Volume for testing on my i7-12700k Hackintosh with MacPro7,1.
Everything except WiFi & Bluetooth is working but the performance with the MacPro7,1 SMBIOS was always bad on the machine (even before the update): the Geekbench score is almost 1/2 of that with iMacPro1,1.

So now I tried applying the "Skip Board ID check" patch to use the iMacPro1,1 SMBIOS, the machine boots but before reaching the Tahoe login screen, the display looses it signal and nothing else happens.
Caps lock still works so I guess it has something to do with graphics but not sure what. Maybe someone has an idea?

(For the update I changed my config and disabled whatevergreen & USB map, and added -lilubetaall to boot-args)

https://redd.it/1nqz9k7
@r_hackintosh

is it worth it to upgrade to Tahoe?

I have a Ryzentosh (AN515-44), is it worth it to upgrade to Tahoe? And what to do to upgrade?

https://redd.it/1nqyv4s
@r_hackintosh

Any help?
https://redd.it/1nr1l8a
@r_hackintosh