✅ Lib file for GCams (SGCAM, LMC, AGC,... ) based on Google Camera v8.4
✅ Merge method is set to 1. The lib can be used with devices supporting Sabre.
✅ Very detailed photos without over sharpness
✅ Close to real colours
✅ Natural looking photos
✅ Suitable for all cameras

Changes:
- A lot of changes in sharpening to get even more details.

Creator: @antykat

----------

How to use custom libs with GCams:
https://www.tg-me.com/antykat_GCam_xml/392

Changelogs:
1.This time its EOL so a total revamp of human mode
2.reamped LDR and color tunes
3. AWB is removed as it caused major issues
Gcam mod- 8.4.400 V43, LINK- https://www.tg-me.com/viosupport/37850
For Redmi Note 7 Pro [Violet] only
Bugs:
Inform me if u found at https://www.tg-me.com/viosupport and for more required help if u r stuck in any problem
Credits:
1.GCAM mod provided by Md Shafiqul Islam Shamim
2. a huge thanks to Piyush Tripathy, Dr. OPTO, Aashish, Bhanu Pratap Yadav for testing these XML’s consistently
3. MIKI Sir for EVO x rom. Tested on evo.
4. Blessed by Sir Johnny

S20 Ultra Snapdragon
SGCAM 8.7 Stable v1

Astrophotography works fine now, after so many adjustments it works.

Custom color transformation.
HDR+E Frames: 30
Telephoto 4x Merge 1
the other default lenses

all lens works (0.5x, 1x, 4x). 

in viewfinder:
HIRES
LP
AWB
LDR
Shade mode is now called Leica.
Default photo gallery: Google photos

Made by @madieljf

Arcide Mi 11 Ultra v3 XML for SGCam 8.4 (v43)

https://www.tg-me.com/googlecameramodbyshamimdg/124907

INSTRUCTIONS:
- Download and install the APK from the link above
- Download the XML from this post and place it in SGCAM\XML (load it by double-tapping the black area around the shutter button)

- Merge 1
- 25 ZSL frames, 35 HDR Enhanced frames
- Fixed face detection (now shows a circle)
- Re-enabled robustness boost on main lens
- Disabled processing
- Slight saturation increase on main lens
- Increased noise model coefficient on front lens
- Many sharpness, denoise and lighting tweaks...

Arcide Mi 11 Ultra 50MP v1 XML for SGCam 8.4 (v43)

https://www.tg-me.com/googlecameramodbyshamimdg/124907

INSTRUCTIONS:
- Download and install the APK from the link above
- Download the XML from this post and place it in SGCAM\XML (load it by double-tapping the black area around the shutter button)

Note:
- To be used with the 50MP mod on Xiaomi 11 Ultra
- Higher sharpness, higher noise model coefficient (more chroma and luma denoise) than the main XML. You can use this in 12MP mode too, but not recommended.

S23 Ultra
SGCAM 8.4 v43

XML of 8.7 soon

(Test)
Custom color transformation.
HDR+E Frames: 30


all lens works (0.6, 1x, 3x, 10x) and front camera also works. 

in viewfinder:
HIRES
LP
AWB
LDR
Shade mode is now called Leica.
Default photo gallery: Google photos

Made by @madieljf

S23+ Snapdragon forever❤️
SGCAM 8.7 v2

Custom color transformation.
Motion camera disabled.
Camera.pck_large_yuv enabled.
3x Merge 1
Main: Raw16


HDR+E Frames: 30


all lens works (0.6, 1x, 3x) and front camera also works. 

in viewfinder:
HIRES
LP
AWB
LDR
Shade mode is now called Leica.
Default photo gallery: Google photos

Made by @madieljf

⏳ 𝐀𝐫𝐜𝐢𝐝𝐞 xml
.
📱 Mi 9 Lite
.
SGCAM 8.4.400 𝐕𝟒𝟑
credits by @arcideMusic
Fixed by : @qartal_dancer For Mi 9 Lite
.
📍xml Folder : SGCAM/XML
.
Apk : 👇👇
https://www.tg-me.com/googlecameramodbyshamim/789
.
#gcam #Sgcam8.4.4 #Sgcam #arcide
.
Join : @Gcam_mi9L

Configs (xml + lib) for SGCAM STABLE_V2 (8.7.250) and Xiaomi 11TPro.

✅ Initial configs, but it already gives good results. It will be improved and updated in the near future.
✅ All cameras are configured
✅ Video works
✅ Motion photo works. Hold shutter button to use it
✅ Sat 1 and Sat 2 modes for more saturated photos from Main camera
✅ Upscaling is set to x2 for all cameras
✅ Night Sight doesn't work properly. It's SGCAM bug, not related to the configs. Use auto night sight. It seems to work well
✅ Some other errors are possible, because this is early versions of SGCAM

❗FOR USING WITH MY LIB (link below):

https://www.tg-me.com/antykat_GCam_xml/415


How to use the xml and the lib:

1. Put the lib into folder:
/SGCAM/LIB/
2. Put the xml into folder:
/SGCAM/XML/
3. Double tap at the black area between shutter button and gallery to load the xml. The lib is loaded automatically by the xml if the lib is in right folder.

Creator: @antykat

------------

SGCAM STABLE_V2 apk:
https://www.tg-me.com/antykat_GCam_xml/414

_For Sgcam of shamim&linkon
https://www.tg-me.com/Gcam_AGC_and_SGCAM/10991
_create on Axon 40 ultra and for similar phone
_use marin V3 lib
https://www.tg-me.com/Gcam_AGC_and_SGCAM/10942

You Can désactivate pro to have less contrast , désactivate exp compensation etc ...

Arcide Mi 11 Ultra v3.1 XML for SGCam 8.4 (v43)

https://www.celsoazevedo.com/files/android/google-camera/dev-shamim/f/dl28/

INSTRUCTIONS:
- Download and install the APK from the link above
- Download the XML from this post and place it in SGCAM\XML (load it by double-tapping the black area around the shutter button)

- Merge 1
- 25 ZSL frames, 35 HDR Enhanced frames
- Changed gamma curve to GMM-A5 by CSeUs
- Decreased noise model coefficient for all rear lenses
- Google sensor ID 12 on ultrawide
- Increased sharpness, decreased denoise, and other tweaks for ultrawide and tele

✅ Lib file for GCams (SGCAM, LMC, AGC,... ) based on Google Camera v8.4
✅ Merge method is set to 1. The lib can be used with devices supporting Sabre.
✅ Very detailed photos without over sharpness
✅ Close to real colours
✅ Natural looking photos
✅ Suitable for all cameras

Changes:
- Further improvements in sharpening
- Changes in luma and luma denoising
- Some other changes

Creator: @antykat

----------

How to use custom libs with GCams:
https://www.tg-me.com/antykat_GCam_xml/392

Configs (xml + lib) for Xiaomi 11T Pro and SGCAM V43 (8.4.400).

Changes:

- A lot of improvements in sharpening and denoising.

About the configs:

✅ Very detailed photos without over sharpness from all cameras
✅ Close to real colours from Main camera
✅ Natural looking photos
✅ Sat 1 and Sat 2 modes for more saturated photos from Main camera
✅ Upscaling is set to x2 for all cameras
✅ Turn on AWB in Night Sight mode to get accurate colours

❗The xml must be used with my lib (link below):

https://www.tg-me.com/antykat_GCam_xml/420


How to use the xml and the lib:

1. Put the lib into folder:
/SGCAM/LIB/
2. Put the xml into folder:
/SGCAM/XML/
3. Double tap at the black area between shutter button and gallery to load the xml. The lib is loaded automatically by the xml if the lib is in right folder.


Creator: @antykat

------------

SGCAM V43 apk:
https://www.tg-me.com/antykat_GCam_xml/345

Configs (xml + lib) for Poco X3 Pro and SGCAM V43 (8.4.400).

It wasn't tested on custom roms and MIUI 14.


About the configs:

✅ Very detailed photos without over sharpness from all cameras
✅ Close to real colours from Main camera
✅ Natural looking photos
✅ Sat 1 and Sat 2 modes for more saturated photos from Main camera
✅ Upscaling is set to x2 for all cameras
✅ Turn on AWB in Night Sight mode to get accurate colours

❗The xml must be used with my lib (link below):

https://www.tg-me.com/antykat_GCam_xml/420


How to use the xml and the lib:

1. Put the lib into folder:
/SGCAM/LIB/
2. Put the xml into folder:
/SGCAM/XML/
3. Double tap at the black area between shutter button and gallery to load the xml. The lib is loaded automatically by the xml if the lib is in right folder.

Made on Xiaomi 11T Pro
Creator: @antykat

Great thanks to Luca Roman (@IAMLUCAROMAN) for his time, tests and especially for necessary fixes to adopt my xml to Poco X3 Pro 👍❤️

------------

SGCAM V43 apk:
https://www.tg-me.com/antykat_GCam_xml/345

Arcide Mi 11 Ultra v3.2 XML for SGCam 8.4 (v43)

https://www.celsoazevedo.com/files/android/google-camera/dev-shamim/f/dl28/

INSTRUCTIONS:
- Download and install the APK from the link above
- Download the XML from this post and place it in SGCAM\XML (load it by double-tapping the black area around the shutter button)

- Merge 1
- 25 ZSL frames, 35 HDR Enhanced frames
- Sharpness tuning
- Color tuning

Who wanted colours like iphuns well that's here 🌺

For GCam : Sgcam 8.4 [V43]


Photography :
✓ Human
✓ Selfie
✓ Nature
✓ Macro
✓ UltraWide
✓ Night

📍Why should you use?:

-For eye catchy vibrant colours in almost every scenario 🫧

-Also a major upgrade from Exotic 🌺 Vol 2, such as:


✅ Major improvements are done in the "Soft" Mode(references from Arcide xml)


✅ Added 64 Megapixel mode.


✅ Twicked "Main" Lens CCT to obtain vivid colours.


✅ MORE Noise is Reduced in Macro, Ultra wide and selfie.


✅ Improved Astro mode with upto 2:50 mins of Timelapse Photography.


✅ Improved colours and shadows of all lenses.


📍Note:
- Turn off the Night sight (from that moon icon) when there's enough light coz bc sometimes it was not working properly so i have turned it to always on.

-Turn on "HDR+" when using Ultra wide lens.




Made on : Mi 11 Lite 5g NE (64mp)

XML Save Directory : sgcam/xml/

Made by @whyady


Use #Exotic as a tag in sample pics if you use this!!! 👁️👁️❤️

Configuration for Poco X3 NFC (fixed bug)
*Video : ( fixed ) slide the toggle frames/sec or resolution
* Slow motion: fixed
*Timelapse : so that it can be used, restart the device first
*large resolution using raw_private
*upscaling is set to X2 for all cameras

Made by: @LARVA33

Arcide Mi 11 Ultra v3.3 XML for SGCam 8.4 (v43)

https://www.celsoazevedo.com/files/android/google-camera/dev-shamim/f/dl28/

INSTRUCTIONS:
- Download and install the APK from the link above
- Download the XML from this post and place it in SGCAM\XML (load it by double-tapping the black area around the shutter button)

- Merge 1
- 25 ZSL frames, 35 HDR Enhanced frames

CHANGELOG:
- Tele lens sharpness improvement
- Other minor optimizations

Arcide Mi 11 Ultra 50MP v2 XML for SGCam 8.4 (v43)

https://www.tg-me.com/googlecameramodbyshamimdg/124907

INSTRUCTIONS:
- Download and install the APK from the link above
- Download the XML from this post and place it in SGCAM\XML (load it by double-tapping the black area around the shutter button)

NOTE:
- To be used with the 50MP mod on Xiaomi 11 Ultra

- Merge 1
- 25 ZSL frames, 35 HDR Enhanced frames

CHANGELOG:
- Increased sharpness and tuned denoise for all lenses
- Processing = OFF for aux lenses
- Changed Google Lens ID to Remosaicked
- Activated skip resize in dev options so photos will always be maximum resolution
- Many other adjustments