1st Hackintosh (GPU questions)
https://redd.it/1o28o3d
@r_hackintosh

Is any one have copy of Modded iso of Mac OS X x86 Tiger for Non-Apple hardware

I tried Searching internet, but there is only forums where i can't get needed files

https://redd.it/1o2a821
@r_hackintosh

MacOS not showing as a Bootable option.

I followed a tutorial and did everything as shown. I reached the point of installing the MacOS. I waited around 4 hours on the "less than a minute remaining" screen. After the 4 hour mark my screen changed to the commands going through and then it booted straight to windows. After I restarted and went to my boot manager, I only see my windows and the boot USB I used. I tried using First aid on the partition with MacOS and then I used the recovery mode to boot into the MacOS partition, I even double checked and it says that it has MacOS on it. Any idea what might be the issue?

https://redd.it/1o2bf0g
@r_hackintosh

Offline Installer Use PKG?

Is there a way to place an application (pkg) in the offline installer so I can use internet from my phone?

https://redd.it/1o29lv5
@r_hackintosh

Help with a hackintosh build?

Hello all, This is my first post here, and I have been trying to mess around with Hackintosh. I am finding it difficult. I followed a guide and got to the point of booting, but it always seems to kernel panic. I have OCAT, OpenCoreSimplify, and ProperTree. I even followed the Dortiana guide too. I tried many ways, but I get to the boot and then kernel panic. Is it possible to hackintosh with this hardware? What is needed? I set up a VM to format my usb with Monterey cause I don't own a mac, even using Windows too. I did check the compatibility, and the only things that don't work are the Bluetooth drivers and Wi-Fi drivers, which is fine because I will be straight hooked to my router. I can provide logs and a compatibility screenshot eventually when I boot it up again. I have dumped my USBMAP from my host machine and my SSDT's, tried light patching for the raptor lake architecture.

My Specs:
i3 13100F Raptor Lake
AMD PowerColor 5700 XT
TeamForce 16GB Single DDR5 Stick due to not ordering the right ram, this is what I had.
Gigabyte B760M DS3H AX DDR5
Realtek 8852 Network & Wifi Driver

https://preview.redd.it/kho8gtl5w4uf1.jpg?width=819&format=pjpg&auto=webp&s=c23c7dadbe63dcf3466dcc58c7e41c8247ae7f66

https://redd.it/1o2e5eq
@r_hackintosh

macOS Tahoe 26.0.1 on i5-9400f (Coffee Lake, No iGPU) & Gigabyte 5500XT OC
https://redd.it/1o2ize2
@r_hackintosh

macos Tahoe 26.1 - Lenovo S145 i5 10th
https://redd.it/1o2n2hv
@r_hackintosh

BARROT Bluetooth Adapter

https://redd.it/1o2nsoz
@r_hackintosh

Any alternatives to gibmacOS?

So, i know gibmacOS downloads these versions from Apple servers, but my PC is giving problems to run macOS Catalina because Sonoma is slow for my PC.

Any alternatives to this?

https://redd.it/1o2qe4i
@r_hackintosh

Good laptop?

I want a windows laptop that also can run macOS without any issues and works w most festures, mainly js wifi and bluetooth if possible and maybe the webcam, been hearing abt thinkpad t480's but do all, or most, features of macOS work on them? Or is there better alternatives?

https://redd.it/1o2tajb
@r_hackintosh

Ryzentosh black screen when using nootedred

I installed macOS Ventura but no graphics acceleration so I booted back into windows and deleted whatever green from kext folder and moved nootedred kext into the kexts folder updated config file using proper tree when I try to boot up my ryzentosh I get black screen after verbose when I put whatervergreen back and update the config it boots normally but no accelerated graphics what should I do

Hp envy x360 15m-bq121dx

AMD Ryzen 5 2500U Vega 8 integrated graphics

https://redd.it/1o2sqjv
@r_hackintosh

Just got this new laptop, is it a good idea to hackintosch it?

Hey yall, i got this new laptop from my grandpa for free, and im wondering if i should hackintosch it. My Network/Bluetooth cards are unfortunatly unsupported. Should i still proceed? And can i use USB-Tethering to get a network?

https://preview.redd.it/7tapg044s8uf1.png?width=1920&format=png&auto=webp&s=933a8d1019927755f1ce82905e650444f28f3405



https://redd.it/1o2uzk2
@r_hackintosh

Which Mac OS is best for i5 6200u hd 520 and 16gb ram? Custom EFI creation only by myself so is it worth it?

Which Mac OS is best for i5 6200u hd 520 and 16gb ram? Custom EFI creation only by myself so is it worth it?

https://redd.it/1o2vkgc
@r_hackintosh

Extension speaker not working

I just install hackintosh for several time and install all kext everything working except my dell extension speaker.

https://redd.it/1o2zfqf
@r_hackintosh

Gedorce Mx130

BEFORE SPAMMİNG UNSUPPORTED GPU FİRST READ

Recently I made a hackintosh on hp 15da1083nt and I am using intel uhd graphics 620 but when I try to use hdmi it didnt work because hdmi port is directly connected to mx130.I looked at the last supported version and it showed as high sierra.I am on seqoia now and I dont want to dongrade to a 7-8 yers old version of macos I can downgrade a few versions.Is there any patch I can use?

https://redd.it/1o31ytg
@r_hackintosh

Help with Skylake Sequoia - HD530

Hiya. I got Sequoia running on my i3-6100T with an HD530, but it's vram is only 7MB. I tried spoofing it to a UHD 620, HD630, UHD630, and multiple platform IDs, but nothing seems to fit it well. Big Sur runs fine on another drive, but I need a near latest OS, which is Sequoia for my use case. Tahoe loads to a white screen, no passing that, so that is not an option. I will drop images of my last config (I am still changing and working on it for the past 2 weeks, and I still make changes every hour.) Any help is appreciated.

ACPI - Used it from Big Sur

After searching through Reddit and Dortania's Guide

Kexts in Kernel, added the AppleIntelSKLGraphics and Framebuffer from Big Sur \/System\/Library\/Extensions\/ upon advice from github, but had no effect.

Boot Args from my research, could be very very very inaccurate.

My CURRENT \(stressing on current as I am changing it a lot to test what works\) SMBIOS, ran iMac18,1 and iMac18,2 to no avail.

Might be needed for helping me, here is the UEFI drivers.

Please help me out here, I just got past the PreFlight error 21 in Sequoia after a lot of trial and error spanning 2 days, and I am a bit rusty as it is my 3rd hackintosh and it has been over 2 years since my big sur one. (Big Sur still runs on this system using another SSD)

Specs:
HP Prodesk 400 g2 mini dm
i3-6100T
HD530
16GB DDR4 2133
Samsung 250GB SATA SSD
Samsung (HP OEM) 512GB SATA SSD
Realtek 8111 and Intel WiFi (using ITWLM)

https://redd.it/1o32xl5
@r_hackintosh

HP ZBook G7 trackpad (ELAN073D) - need help

Hi everyone! I'm writing here as a last resort. I've tried everything I could find as information, but I couldn't get the trackpad to work. My only question is whether anyone has managed to get this working, and if so, how did they do it? I'll figure out the rest once I get some pointers :D

I tried the "official" Dortania guide, YouTube videos, the posts here, but nothing worked. I even went as far as downloading a pre-made EFI just to see how others managed to solve it, but it wouldn't work with that either.

Thanks a lot for the help in advance.

CPU: Intel i9-10885H

GPU: UHD 630

RAM: 16GB DDR4

Laptop model: HP ZBOOK G7

Touchpad: ELAN073D I2C

Loader/System: OpenCore 1.0.5 / Sonoma

https://redd.it/1o31iet
@r_hackintosh